1.0 Safety & Compliance

This device complies with Part 15 of the FCC Rules and CE directives for electromagnetic compatibility. Operation is subject to the condition that this device does not cause harmful interference.

2.0 Product Overview

The BG-700 AIoT Gateway is a rugged, high-performance device designed to bridge industrial sensors and machinery with the Burooq cloud platform. It utilizes our proprietary CoSS (Custom Secure Communication) protocol for end-to-end encrypted data transmission.

2.1 Key Features

• Multiple Connectivity Options: Ethernet, Wi-Fi, and 4G/5G Cellular.
• Wide Range of Sensor Inputs: Modbus, RS-485, Analog I/O, Digital I/O.
• Onboard AI for Edge Computing: Pre-processes data to reduce latency and cloud costs.
• Ruggedized Enclosure: IP65 rated for dust and water resistance.
• Secure OTA (Over-the-Air) firmware updates.

2.2 Technical Specifications

Attribute	Specification
CPU	Quad-Core ARM Cortex-A53 @ 1.8 GHz
Power Input	12-36V DC
Operating Temperature	-20°C to +70°C
Dimensions	150mm x 120mm x 45mm

3.0 Installation Guide

3.1 Physical Mounting

1. Select a mounting location with adequate ventilation and minimal exposure to direct vibration.
2. Use the four provided mounting screws to affix the gateway to a DIN rail or a flat surface.
3. Connect the appropriate antenna(s) for Wi-Fi or Cellular communication.

3.2 Power & Network Connection

1. Ensure the power source is off. Connect the 12-36V DC power supply to the gateway's terminal block.
2. For a wired network, connect an Ethernet cable to the RJ45 port.
3. Power on the device. The 'PWR' LED should turn solid green. The 'NET' LED will blink while establishing a connection.

4.0 Troubleshooting

Problem	Possible Cause	Solution
'PWR' LED is off	No power from source or faulty connection.	Verify power supply is active. Check all wiring and terminal connections.
'NET' LED is solid red	Cannot connect to the Burooq cloud.	Check Ethernet cable. Verify firewall rules are not blocking outbound traffic on port 443. Check cellular signal strength if applicable.
Sensor data not appearing	Incorrect Modbus/RS-485 configuration or faulty sensor wiring.	Log in to the gateway's web interface and verify sensor configuration. Check physical wiring for breaks or incorrect polarity.

5.0 Support Information

For advanced technical support, documentation, and firmware downloads, please visit our support portal or contact your Burooq Solutions representative.

• Support Website: www.burooq.net/support
• Support Email: industrial.support@burooq.net
• Phone: +971 568 661 620